Commissioning
Before switching on
7
l
38
LDEDS−CCU210B EN 4.0
7
Commissioning
7.1
Before switching on
Before initial switch−on, check ...
ƒ
... whether the drive is undamaged.
ƒ
... the entire wiring with regard to completeness, short circuit and earth fault.
ƒ
... whether the mains and the motor are connected in correct phase relation.
ƒ
... whether the control bars and message bars are connected in correct phase
relation.
ƒ
... whether the configuration saved is valid for the application.
ƒ
... whether the parameters loaded are optimally adapted to the motor.
