Safety instructions
Residual hazards
EDKRBS047R DE/EN/FR/ES/IT 9.0
36
l
H1sic_EN−UR_Warn
O
Warnings!
Conditions of Acceptability:
ƒ
The products covered by this report are intended for use with Power
Conversion Equipment (drives) only.
ƒ
The Temperature Switch must be connected to the drive, so that the drive
switches off in case when the maximum operating temperature is
exceeded.
ƒ
Temperature tests and abnormal operation tests have only been conducted
for single resistive elements and for continuous duty as indicated under
RATINGS. For any grouping of the resistor elements an additional
temperature test must be conducted, depending on the evaluation of the
mechanical construction and the expected temperature rise.
ƒ
For any duty cycle operation in the end−use application it must be
guaranteed that the maximum Wattage rating will not be exceeded. This
may be evaluated by calculation. If there will be any concern regarding to
this, additional temperature tests have to be conducted under end−use
conditions.
