Gearbox with oil compensation reservoir for mounting position M4 (C)
In order to guarantee a reliable lubrication of the toothed parts in mounting position M4 (C)
(motor is on the gearbox vertical from the top), a high filling level is required in the gearbox.
As a result of the reduced volume of air in the gearbox, this may lead to oil escaping from the
ventilation at higher input speeds. The oil compensation reservoir increases the expansion
space for the lubricant.
The oil compensation reservoir can be ordered as a mounting set for fastening to the gearbox.
If insufficient space is available, the oil compensation reservoir can also be mounted over the
gearbox hose connection on nearby system parts.
Dimensions
Dimensions are contained in the configuration document.
Mechanical installation
Dimensions
Ventilation
29
