EDS94AYCCA EN 5.0 - 06/2012
L
13
E94AYCCA communication manual (CANopen®)
Safety instructions
Device and application-specific safety instructions
All works on and with Lenze drive and automation components may only be carried out
by qualified personnel. According to IEC 60364 and CENELEC HD 384 these are persons
who ...
– are familiar with installing, mounting, commissioning, and operating the product.
– have the qualifications necessary for their occupation.
– know and are able to apply all regulations for the prevention of accidents, directives
and laws that apply to the location of use.
2.2
Device and application-specific safety instructions
During operation, the communication module must be securely connected to the
standard device.
With external voltage supply, always use a separate power supply unit, safely
separated in accordance with EN 61800-5-1 in every control cabinet ("SELV"/"PELV").
Only use cables that meet the given specifications.
Specification of the bus cable
2.3
Residual hazards
Protection of persons
If Servo Drives 9400 are used on a corner grounded system with a rated mains voltage
≥
400V, external measures need to be implemented to provide reliable protection
against accidental contact.
Device protection
The communication module contains electronic components that can be damaged or
destroyed by electrostatic discharge.
Documentation of the standard device, control system, and plant/machine
All the other measures prescribed in this documentation must also be
implemented. Observe the safety instructions and application notes stated in
this manual.