Lenze · Decentralised frequency inverter 8400 motec (AS-Interface option) · EDS84DMOTASI EN 5.0 - 02/2019
61
Parameter reference
Communication-relevant parameters of the operating system
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
12
Parameter reference
This chapter supplements the parameter list and the table of attributes in the software manual and
in the »Engineer« online help for the Inverter Drive 8400 motec by the parameters for AS-i
communication.
12.1
Communication-relevant parameters of the operating system
This chapter lists the communication-relevant parameters of the 8400 motec operating system in
numerically ascending order.
C01501
C01503
Software manual/»Engineer« online help "Inverter Drive 8400 motec"
Here you will find general information on parameters.
Parameter | Name:
C01501 | Response in case of communication fault with MCI
Data type: UNSIGNED_8
Index: 23074 = 0x5A22
Setting the response to a communication fault or an incompatible communication unit
Selection list
0 No response
1 Error
4 Warning Locked
Subcodes
Lenze setting
Info
C01501/1
1: No Response
Resp. to MCI fault 1
• Response to a communication fault.
C01501/2
1: No Response
Resp. to MCI fault 2
• Response to an incompatible communication unit.
Read access
Write access
CINH
PLC STOP
No transfer
COM
MOT
Scaling factor: 1
Parameter | Name:
C01503 | MCI timeout
Data type: UNSIGNED_16
Index: 23072 = 0x5A20
Setting range
(min. value | unit | max. value)
0
ms
1000
Subcodes
Lenze setting
Info
C01503/1
200 ms
MCI timeout
Read access
Write access
CINH
PLC STOP
No transfer
COM
MOT
Scaling factor: 1
