Lenze 9300 vector Series, System Manual

Page: 167 / 232

Configuration
2−159
l
EDSVF9383V−EXT EN 2.0
2.4.57 Output of digital status signals (STAT)
The FB accepts digital signals of the function blocks and the status of the controller and passes them
on to C0150 and to the FB AIF−OUT and CAN−OUT1.
C0156/1 STAT.B0
STAT.B2
STAT.B3
STAT.B4
STAT.B5
STAT.B14
STAT.B15
DCTRL−IMP
STAT
DCTRL−WARN
DCTRL−MESS
DCTRL−NACT=0
C0156/2
C0156/3
C0156/4
C0156/5
DCTRL−STAT*1
DCTRL−STAT*2
DCTRL−STAT*4
DCTRL−STAT*8
0
1
2
3
4
5
6
8
9
DCTRL−CINH
7
10
11
12
13
14
15
C0156/6
C0156/7
AIF−
Status word
C0150
CAN1−
Status word
Fig. 2−138 Output of digital status signals (STAT)
Signal Source Note
Name Type DIS DIS format CFG List Lenze
STAT.B0 d − bin C0156/1 2 2000 −
STAT.B2 d − bin C0156/2 2 5002 −
STAT.B3 d − bin C0156/3 2 5003 −
STAT.B4 d − bin C0156/4 2 5050 −
STAT.B5 d − bin C0156/5 2 10650 −
STAT.B14 d − bin C0156/6 2 505 −
STAT.B15 d − bin C0156/7 2 500 −
Function
The status word consists of some linked (DCTRL−xxxx−) and some freely linkable signal inputs
(STAT.Bx).
l Digital signal sources can be freely assigned to the inputs STAT.Bx.
l The corresponding bit in the data word is marked with STAT.Bx (e.g. STAT.B0 for the least
significant bit).
l
The status word is transferred to code C0150 and to the function blocks AIF−OUT, CAN−OUT1,
CAN−OUT2, and CAN−OUT1.
l
The inputs with the name DCTRL−xxxx are directly accepted from the function block DCTRL.
(
¶
2−82)