Lenze 8210 HVAC Series, Operating Instructions Manual

Page: 66 / 94

Configuration
7-2
821XKlimaBA0399
7.2 Code table
How to read the code table:
Column Abbreviation Meaning
Code C013 Code C013
-
The parameter of the code can be different in PAR1 and
PAR2.
-
The parameter value is accepted immediately (ONLINE).
C009*
-
The parameter value of the code is always the same in
PAR1 and PAR2, but is always displayed in PAR1.
C001
¤ -
The parameter value of the code will be accepted after
pressing SH+ PRG.
[C002]
-
The parameter value of the code will be accepted after
pressing SH+ PRG but only if the controller is inhibited.
Name
820X
Name of the code.
Unit-specific setting possibilites (here for 820X).
Without unit designation the code is valid for all unit types.
Lenze Factory setting of the code
* The column ”Important” contains further information
Selection 1 {1 %} 99 Min. value {Steps/Unit} Max. Value
Info - Meaning of the code
IMPORTANT - Additional, important explanation of the code
Show/Hide Bookmarks