Lenz Digital plus, Operating Manual

Page: 24 / 56

24
With XPA you can:
•
control and call on 9999 digital locomotives. The address 0 is used to control
one conventional locomotive in the digital power circuit
•
switch 8 functions in locomotive decoders.
•
control multiple tractions which were assembled with a different XpressNet
device.
•
switch 1024 points and signals.
•
carry out device settings.
The XPA can be connected to the following components of the Digital Digital Digital Digital plus plus plus plus by by by by Lenz Lenz Lenz Lenz
®
® ®
®
system: LZ100; SET02; SET03;
compact
compact compact
compact
The operation of the XPA requires the software version 3 of the Digital plus
system.
The XPA cannot be used with devices which use an older software version. If
applicable, check whether updates are available for your devices.