Information LH100 V3.6
43
entered position (+ or -) when you call up the turnout. And when you
press the + or - keys, the display will update immediately.
If after entering for instance the turnout address ‘118’ you see this
display
then this address is not an accessory decoder, but a feedback
encoder LR100.
In this case pressing the ‘+’ or ‘-’ key will have no effect. Using the ‘Cl’
key you can get back to entering a new turnout address, using ‘Esc’
you can get back to controlling locomotives. Information about
displaying the status on feedback encoders is in section "
Displaying
feedback
" starting on page (
p.43 ).
9.2
Train operation while controlling turnouts or
signals
While displaying a turnout address and its status, you can still use the
operation keys to control the most recently called up locomotive.
When you press one of the operation keys, this locomotive address or
speed is shown in the display. The turnout's address is shown when
you stop pressing the key.
The locomotive's address’ direction arrow and the status of the
decoder functions are always shown in the display. This way you can
still control the selected locomotive even while you throw turnouts and
set signals. This allows you to comfortably execute yard switching
operations.
10
Displaying feedback
In this section you learn how to display layout feedback on the LH100
display
Using this LH100 function you can show the status of any of the
LR100/101 feedback encoders inputs.
Press
On the display you see
Explanation
Display
shows
the
most
recently selected menu
