background image

IB-PH559(9803C)-WM-E-042602

TELEPHONE FEATURES
Memory Dialing

You can quickly dial the numbers you stored into the 3 one-touch speed dial buttons or 10

two-touch speed dial memories.

STORING PHONE NUMBER INTO MEMORY

1. Press the STORE button. 

 (short for programming) appears on the display.

2. Dial the phone number you want to store. You can store up to 22 digits (including a

TONE ( 

 ) and a PAUSE

 

(

REDIAL/PAUSE

), each of which is counted as one digit).

NOTE

When the batteries are dead or removed for more than five minutes, the stored

numbers may be erased.

TIP 1:

If you entered a wrong number, you may press the STORE button, then start from

the beginning.

To store a number to be dialed via Private Branch Exchange (PABX)

Before entering a phone number in Step 2 in 

Storing phone number into memory

, do as

follows:

1. Enter the outside line access digit (e.g., 9).

2. Press REDIAL/PAUSE button (for a pause).

To check the stored number

While the handset is on the base, press the desired one-touch speed dial button, or press

the AUTO button and the desired two-touch memory number (0 to 9).

The stored number appears on the display for 3 seconds.

To change a stored number

Just store a new number, as described above, the old number will be erased automatically.

MAKING CALLS WITH 3 ONE-TOUCH SPEED DIALING

BUTTONS

1. Pick up the handset or press the SPEAKER button.

2. Press one of the one-touch speed dial buttons (M1 to M3).

3. The phone will dial the numbers you stored into it.

3. 

For 3 one-touch dialing:

For 10 two-touch dialing:

Press one of the 3 one-touch

speed dial buttons (M1 to M3).

4. The stored number and the location will be shown in the display.
5. Press the STORE button or wait 3 seconds to resume normal display.
6. Repeat steps 1 to 5 to store numbers into other memory locations.

10

Press AUTO button, and then press one of the

dialing keys (0 to 9) to store a phone number in

.

MAKING CALLS WITH 10 TWO-TOUCH SPEED DIALING

LOCATIONS

1. Pick up the handset or press the SPEAKERPHONE button.

2. Press the AUTO button first.

3. Press the desired two-touch memory number (0 to 9).

TIP 2:

If you want to store a calling card number into one of your memories, you may do this

the same way you program a phone number into memory. Also if you need a pause

in the number, simply press the REDIAL/PAUSE button on your phone.

IB-PH559(9803C)-WM-E-042602.p65

4/26/02, 4:30 PM

12

Summary of Contents for Lenoxx Sound PH-559





















Reviews: