1
2
3
Place the sport bottle on a flat surface
with the open end facing up. Fill the
sport bottle with your favourite
ingredients. Be sure not to fill
ingredients past the 20oz marking.
Fasten the blade assembly on the
open end of the blender bottle.
Make sure that the blade assembly is
secured to the bottle and is not
leaking. Turn the bottle upside down.
Turn the bottle upside down so that the
blade assembly is facing down.
With one hand on the motor base and the
other holding the assembled bottle, place it
inside the motor base and align the bludged
point to blender base and turn clockwise to
lock (this is now on lock position).
Plug the power cord into power outlet and
switch on at the power point.
Turn the bottle clockwise to start. Blending
will commence once blender bottle is
properly locked and secured.
Blender will not turn on unless it is locked
properly.
Once you are satisfied with the consistency,
turn the blender bottle anti-clockwise to
stop.
It takes about 1-2 minutes to finish the
blending.
Always unplug the blender from the power
point before releasing the blender bottle
from the blender base
