with reduced physical, sensory or mental capabilities,
or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
x
Do not operate the appliance if the plug, power cord or the appliance
itself is damaged.
x
If the power cord is damaged, you must have it replaced at by a
qualified technician in order to avoid a hazard.
x
The instructions shall state that the appliance is not intended to be
operated by means of an external timer or a separate remote-control
system.
HOW TO BOIL WATER:
Note: This appliance is to be filled with water only. No other liquid, objects, or
food shall be placed into the tank.
Fill the tank with cold water.
Fill the tank no more than the maximum level, which is marked on the inside of
the tank.
Ensure the lid is placed on the urn.
Make sure the environmental temperature indoors is at about 10-38 degrees
and the environmental humidity is less than 90%.
Switch the unit on. The heating indicator light will be on (red indicator light).
Place the temperature dial to the 95 degree mark until it boils.
When the water has started to boil, reduce the temperature to 80 degrees.
The keep warm indicator light (orange indicator light) will be on.
The urn will maintain the temperature at 80 degrees. When the temperature
has dropped, then urn will begin to heat the water until it reaches 80 degrees
again.
We highly recommend that the temperature remains at 80 degrees and that the
water level is between 35 to 40.
We do not recommend that the urn is used for more than 15 hours of continuous
use.
