HARDWARE MAINTENANCE:
Brake
Check the brakes for proper function. When you squeeze the lever, the brake should provide
positive braking action. When you apply the brake with the speed control on, the brake cut
off switch should stop the motor. Make sure that the brakes are not rubbing.
Frame, Fork and Handlebars
Check for cracks or broken connections. Although broken frames are rare, it is possible for
aggressive rider to run into a curb or wall and bend or break a frame. Get in the habit of
inspecting your scooter on a regular basis.
Battery
Make sure the power switch is
turned off whenever the scooter is not in use. Never store
the product in freezing or below freezing temperatures! Freezing will permanently damage
the battery.
Lubricating
Please add a small amount of grease or lubricants to handle folded position every six months. Please
check scooter every three months if the screws are loose it up.
Placement and daily care
Do not expose the scooter under the sun or wet places for too long time. Please keep the scooter
clean and dry. For cleaning use a damp cloth and mild detergent.
Charger
Only use the supplied battery charger. If charger is damaged discontinue use immediately and replace
with a Lenoxx recommended charger.
Wheels
Wheels and drive system components are subject to normal wear and tear. It is the responsibility of
the user to regularly inspect wheels for excess wear and adjust and replace drive train components as
required.
