Aux in
This alarm clock features an AUX in port.
Connect an Aux in lead (not included) to the earphone jack of a MP3 player or similar device.
Start music playback on your device.
Press the “ON/OFF” button to turn the clock radio on.
Press the “MODE” button repeatedly until the word AUX is shown on the screen of the clock radio.
Connect the other end of the Aux in lead to the Aux in port on the rear of the alarm clock.
The sound of the music playing back from the device will them he played through the alarm clock.
Press the “VOL +” or “VOL - “button to adjust the volume.
Battery back up
This alarm clock features a battery back up option. This alarm clock is not battery powered.
The time will not be shown if it has batteries inside it and is not connected to mains power.
Add 2 x AAA size batteries (not included) to the alarm clock.
In the event of a power outage, the clock will not show any display.
When the mains power comes back on, the correct clock time will be displayed.
NOTES
1.
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as
vases, shall be placed on apparatus.
2.
To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the
mains. As the disconnect devices is the mains plug of apparatus.
3.
The mains plug of apparatus should not be obstructed OR should be easily accessed during intended use.
4.
Battery shall not be exposed to excessive heat such as sunshine, fire or the like.
5.
Minimum distances 10cm around the apparatus for sufficient ventilations.
6.
The ventilation should not be impeded by covering the ventilation openings with items such as newspaper,
tablecloths, curtains etc.
7.
No naked flame sources such as lighted candles should be placed on the apparatus.
8.
Attention should be drawn to the environmental aspects of battery disposal.
9.
The use of apparatus in moderate climates.
10.
The rating label has marked on the bottom panel of the apparatus.
SPECIFICATIONS
Frequency Range: AM 530-1600KHz
FM 88 –108 MHz
Power Source: AC 230V ~ 50 Hz, 4W
DC 2 x AAA batteries (For back-up) (not included)
Power Output: 300 mW