manualshive.com logo in svg

Lenoxx CDR-1902, Operating Instructions Manual, Page: 16 / 17

Share
Download
Lenoxx CDR-1902 Operating Instructions Manual Download Page 16

IB-CDR1902(AD)-WM-E-062802

Trouble Shooting

Problem

Remedy

The power is not on.

•

Connect the AC power cord to a wall

outlet securely. Make sure that outlet

has power.

There is no sound.

•

 Make sure the FUNCTION switch is at the

right position as you want.

•

 Adjust the volume.

•

Unplug the headphones when listening

through speakers.

“    ”appears in the display

even when a CD is in place.

•

 Insert the CD with the label side up.

CD does not play.

•

Make sure that the CD compartment is

closed.

•

 Place the CD with the label side up.

•

 CD play is paused, press   again.

•

Take out the CD and leave the CD door

open for about an hour to dry moisture

condensation.

•

 Make sure the FUNCTION switch is at CD

position.

•
•

The sound is weak or has

poor quality.

•

 Fully stretch out the FM antenna to improve

FM reception.

•

General

CD player

Radio

The sound drops out.

15

Alarm does not come on in the

morning.

•

 AM or PM not set correctly. Is alarm time

set in AM range (PM lamp off)?

•

MODE switch is not set to the proper position.

Are the ALARM lamps off?

Clean the CD, or replace it if the CD is badly

damaged.

Place the player in a location free from

vibration.

Bring the set near a window, or rotate the

set for AM reception.

Summary of Contents for CDR-1902


















Reviews:

No comments