NOTE:
If a disc is inserted the wrong way around, respectively if no disc is inserted, then “No
“appears on the display.
Programmed Play
This can be used to program any desired sequence of tracks.
Up to 20 tracks for CD can be programmed for disc play in any order.
Be sure to press the “STOP” button before use.
1. Press the “PROGRAM” button, the display will show “01” and flash.
2. Select desired track by using the “SKIP +” or “SKIP -” button.
3. Press the “PROGRAM” button again to confirm desired track into the program memory.
4. Repeat step 2 and 3 to enter additional tracks into the program memory.
5. When all the desired tracks have been programmed, press the “PLAY / PAUSE” button to
play the disc in the order you have programmed.
6. Press the “STOP” button twice to terminate programmed playback.
MODE
Press the “REPEAT” button before or during playing CD disc, each press switches the mode
function as follows:
1 - REPEAT
2 - REPEAT ALL
3 - NORMAL PLAYBACK
AUX IN socket
Under “CD” or “RADIO” mode, if you want to play from AUX-IN jack, please connect the
external device via a 3.5mm AUX-IN lead (not included) to the AUX-IN jack.
You can hear the sound from the external device through the speakers and you may adjust
the volume on the external audio device.
For further functions please refer to the user manual of the external audio device.
This socket is not an earphone jack.
NOTE:
Adjust the volume of the external device to a comfortable level.