IB-CD163(TA)-FREDS-E-042602
RECORDING ON A TAPE
Connect the supplied AC power cord or batteries (see page 4).
Press the STOP/EJECT button (DECK
B) to open the tape compartment and
insert a blank tape. Select the program
source (AM, FM, CD, or microphone)
you want to record.
2
4
3
STOP/EJECT
To record from the CD player, set the FUNCTION switch to
CD position, insert a CD and follow the steps to play a CD
(see page 7).
To record from a radio, set the FUNCTION switch to RADIO
position, and tune into the station you want (see page 11).
To record from the microphone, set the FUNCTION switch to
the TAPE position, and plug the microphone(s) (not included)
into either of the MIC JACKS. Speak into the microphone.
4
RECORD
To hear what you recorded, set the FUNCTION switch to
TAPE position, then press REWIND and PLAY.
5
REWIND PLAY
16
To record from the DECK A, set the FUNCTION switch to the
TAPE position, and follow the steps to play a TAPE (see
page 13).
OK
NO
2
1
Press the POWER switch, the STANDBY
lamp will go off and the VFD display will
turn on.
Press the RECORD button to start recording. (The PLAY
button is depressed automatically.)
1
3
MICROPHONE JACKS
OR
OR
THEN
STAN DB Y
PO W ER
A
