background image

 

 

Storage:   

Do not store the ride-on in an area of high temperature, humidity or near flames.   
When raining or snowing, keep the ride-on under cover and out of the weather. 

 

Further information on the battery: 
AA BATTERIES INSIDE THE HANDLEBAR MUSIC PANEL (NOT INCLUDED): 

● Non

-rechargeable batteries are not to be recharged. 

●  If  removable  rechargeable  batteries  are  used, 

they  are  only  to  be  charged  under  adult 

supervision. 

● Remove recharge

able batteries from the product before charging. 

●  Do  not  mix  old  and  new  batteries.  Do  not  mix  different  types  o

f  batteries:  alkaline,  standard 

(carbon-zinc) or rechargeable (nickel-cadmium). 

●  Insert  batteries  as  indicated  inside  the  battery  compartment,

  anode  to  anode,  cathode  to 

cathode. 

● Remove

 batteries during long periods of non-use. Always remove exhausted batteries from the 

product. Battery leakage and corrosion can damage this product. Dispose of batteries safely. 

● Never short circuit the batter

y terminals. 

 

The 6V rechargeable battery: 

Do not change the batteries setting, as it can cause fire and damage the electrical circuit system.   
Do not change the ride-on

s electrical circuit system. Any repairs done to this unit must be carried 

out by authorised and qualified service personnel. 
Do not allow children to charge the motor ride-on, play with the battery or motor.   
If the ride-on will not be used for a long period of time (3 months or longer), it is advised that you 
fully charge the battery and disconnect it from the connections. 
A long period of non-use will damage the battery. It is advised that the battery should be charged 
once a month, even if the ride-on is not being used. 
A new battery must be fully charged before its first use.   
Please take care with the battery as it contains acid electrolyte. Handling of the battery by adults 
only. 
If the battery has leaked, do not touch the acid. Place the battery into a polybag and dispose of it. 
If the electrolyte splashes on your skin or into your eyes, immediately wash with water for at least 
15 minutes and consult your doctor. 
Do  not  contact  the  batteries  two  terminals  with  any  other  metal  objects.  It  will  cause  short 
circuiting, damage or fire. 
Adjust  the  f/r  switch  to on  and  press  the  siren button  to  check  for power.  If  you hear  no  music, 
check that the battery has been joined up correctly. Correct if required. 
Never push or pull the ride-on backward when it is running. 
Do  not  plug  the  charger  into  any  non-working  or  faulty  wall  socket.  This  could  cause  short 
circuiting or fire. 
In the circumstance of unstable voltage, we suggest that you equip a regulator. 

 

 

Summary of Contents for 90403B




















Reviews: