Cymbal Mounting:
15. Locate the cymbal arm
(Q)
. Insert into the cymbal mount
(R)
on the bass drum with the threaded
section furthest from the player and secure. Unscrew cymbal topper
(S)
and one felt.
16. Place the cymbal
(T)
on the stand with one felt below the cymbal. Replace the top felt and
cymbal topper. Please note that the topper does not need to be screwed down tight on the felt and
cymbal. The cymbal should be free to move during play. Its main operation is to prevent the cymbal
from falling off the stand when struck.
Drum Throne, AKA Stool:
15. Open the drum throne base
(U)
so that the three legs are extended fully. Insert the seat post into
the block underneath the throne top
(V)
and secure. Adjust sitting height and secure.
16. Once seated, you can now bring the set together and fully adjust any heights and angles of the
drums, cymbal and stands to your liking.
