Lenoxx Sound CD-162, Operating Instructions Manual

Page: 24 / 26

TROUBLE SHOOTING
Problem
Remedy
The power is not on.
•
Connect the AC power cord to a wall
outlet securely.
•
Make sure the batteries are inserted
correctly and they are fresh.
There is no sound.
•
Make sure the FUNCTION switch is at the
right position as you want.
•
Adjust the volume.
•
Unplug the headphones when listening
through speakers.
“ ”
appears in the display
even when a CD is in place.
•
Insert the CD with the label side up.
CD does not play.
•
Make sure that the CD compartment is
closed.
•
Place the CD with the label side up.
•
Clean the CD.
•
Take out the CD and leave the CD DOOR
open for about an hour to dry moisture
condensation.
•
Make sure the FUNCTION switch is at CD
position.
•
Clean the CD, or replace it if the CD is
badly damaged.
•
Place the player in a location free from
vibration.
•
Check if your batteries are fresh.
The sound is weak, or has
poor quality.
•
Replace all the batteries with new ones if
they are weak, or bring the set near a
window, or rotate the set.
The RECORD button does not
function/The tape does not
play.
•
Make sure the safety tab on the cassette
is in place (see page 21).
•
Make sure the FUNCTION switch is at TAPE
position.
The tape does not erase
completely.
•
Clean the erasing head (see page 22).
•
Replace all the batteries with new ones if
they are weak.
The tape does not record.
•
Make sure the tape is inserted properly.
•
Make sure the safety tab of the cassette
is in place.
The sound is weak/The
sound quality is poor.
•
Clean the heads, pinch roller and capstan
(see page 22).
General
CD
player
Radio
The sound drops out.
Tape
player
Cassette PLAY button pops
up.
•
The tape has reached its end. Remove
it, flip to the other side and re-insert.
23
VFD display does not light
up.
•
You may use battery power, the VFD
display only light up when using AC power.
IB-CD162(SLIM)-TA-V1