CONNECTING TO HOME STEREO SYSTEMS
The AUX OUT jack is made to accept a stereo mini plug (3.5mm). Simply connect the
cables mini plug to the AUX OUT jack on your player, and the other appropriate end
usually RCA JACKS to the CD/AUX
INPUTS
of your home stereo.
YOUR CD PLAYER
TO AUX IN JACKS
TO AUX OUT JACK
YOUR STEREO
SYSTEM
OPTIONAL CABLE (3.5mm)
TO RCA JACKS
5
NOTE:
The car cassette adaptor has the play head on one side
only. If the cassette adaptor keeps ejecting out, or the sound is weak, press
the REVERSE button on your cassette player to change direction or reverse
the adaptor.
Remove two large
screws with a dime
or screwdriver
Fig. 1
Fig. 2
Move cord to desired
position (three cord
positions)
The car cassette adaptor allows you to use your CD player with your car stereo
cassette system or portable audio cassette system.
1. Insert the car cassette adaptor in the same direction as you would insert an audio
cassette tape, with the side marked THIS SIDE UP facing upwards.
Reposition the cord
The cord should extend out from the cassette player
when the cassette is inserted (direction depending
on your tape player).
1. To reposition the cord, remove the top plate by
removing 2 screws with a dime (see Fig. 1).
2. Reposition the cord so that it comes out from
other positions (see Fig. 2).
3. Replace the cover and the screws.
TO AUX OUT JACK
CASSETTE ADAPTOR
2. If the car cassette adaptor cord is on the wrong side
of the tape, reposition the cord by following the
instructions below.
3. Insert the car cassette adaptor stereo plug into the
AUX OUT jack on the right of the CD player.
4. Turn on the cassette player. Press PLAY button on
the cassette player.
5. Press PLAY on the CD player.
6. Adjust the volume on your cassette player.
7. When done, leave the cassette player on and first
eject the adaptor, then turn off cassette player.
All manuals and user guides at all-guides.com
all-guides.com
