Lenovo ThinkVision E500, User Manual, Page: 37 / 82

Advanced Feature menu
Follow the steps below to access the Advanced Feature menu.
1.
Press the Menu button to open the OSD menu.
2. Press the cursor left/right button to move into the Properties menu.
3. Press the cursor up/down button to select Advanced Feature.
4. Press the Enter button to open the Advanced Feature menu.
5. Press the cursor up/down button to move up and down within the Advanced
Feature menu.
The following table shows the options that you will see in the Advanced
Feature menu and the default values.
Table 5-1.
Item Description Default
User Color Allows control over the individual colors. Press the
Enter button to bring up the colors sub-menu, then
press the cursor up/down button to select the color.
Use the cursor left/right button to alter the
intensity of that color.
Range 0 to 100
80
White Peaking Allows control over the white brightness while
leaving the other colors unaffected. Press the cursor
left/right button to change the White Peaking.
Range 0 to 10
10
Logo Display Press the cursor left/right button to enable or
disable the logo display at initial power on and
when there is no input to the projector.
Range On/Off
On
Cancel Resets all Advanced Function item settings to the
default value.
N/A
Options menu
To access the Options menu, follow the steps below.
1. Press the Menu button to open the OSD menu.
Chapter 5. On-Screen Display menu controls
5-5