manualshive.com logo in svg

Lenovo ThinkSystem SR665, Setup Manual

The Lenovo ThinkSystem SR665 setup manual is a comprehensive user guide providing detailed instructions for quick and hassle-free installation. This indispensable manual can be easily downloaded free of charge from our website, ensuring you have access to all the essential information you need to maximize your product's potential.

Share
Download
background image

Additional information about using Lenovo XClarity Provisioning Manager V3 to update firmware is 
available at:

http://sysmgt.lenovofiles.com/help/topic/LXPMv3/LXPMv3_platform_update.html

• 

Lenovo XClarity Controller

If you need to install a specific update, you can use the Lenovo XClarity Controller interface for a specific 
server.  

Notes: 

–  To perform an in-band update through Windows or Linux, the operating system driver must be installed 

and the Ethernet-over-USB (sometimes called LAN over USB) interface must be enabled.

Additional information about configuring Ethernet over USB is available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_ 
configuringUSB.html

–  If you update firmware through the Lenovo XClarity Controller, make sure that you have downloaded 

and installed the latest device drivers for the operating system that is running on the server.

–  Specific details about updating firmware using Lenovo XClarity Controller are available at:

http://sysmgt.lenovofiles.com/help/topic/com.lenovo.systems.management.xcc.doc/NN1ia_c_ 
manageserverfirmware.html

• 

Lenovo XClarity Essentials OneCLI

Lenovo XClarity Essentials OneCLI is a collection of command line applications that can be used to 
manage Lenovo servers. Its update application can be used to update firmware and device drivers for 
your servers. The update can be performed within the host operating system of the server (in-band) or 
remotely through the BMC of the server (out-of-band). 

Specific details about updating firmware using Lenovo XClarity Essentials OneCLI is available at:

http://sysmgt.lenovofiles.com/help/topic/toolsctr_cli_lenovo/onecli_c_update.html

• 

Lenovo XClarity Essentials UpdateXpress

Lenovo XClarity Essentials UpdateXpress provides most of OneCLI update functions through a graphical 
user interface (GUI). It can be used to acquire and deploy UXSP update packages and individual updates. 
UXSP contains firmware and device driver updates for Microsoft Windows and for Linux.

You can obtain UXSP from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-xpress

• 

Lenovo XClarity Essentials Bootable Media Creator

You can use Lenovo XClarity Essentials Bootable Media Creator (BoMC) to create bootable media that is 
suitable for firmware updates, VPD updates, inventory and FFDC collection, advanced system 
configuration, FoD Keys management, secure erase, RAID configuration, and diagnostics on supported 
servers.

You can obtain BoMC from the following location:

https://datacentersupport.lenovo.com/solutions/lnvo-bomc

Configure the firmware

You can configure the management processor for the server through the BMC Web interface (Lenovo 
XClarity Controller) or through the command-line interface.

240

ThinkSystem SR665 Setup Guide

Summary of Contents for ThinkSystem SR665













































































































































































































































































Reviews:

No comments

Related manuals for ThinkSystem SR665

Quantum NDX Series Installation Manual preview
NDX Series
Brand: Quantum Pages: 14
IEI Technology PUZZLE-IN003A User Manual preview
PUZZLE-IN003A
Brand: IEI Technology Pages: 89
IBM System x3250 M3 Type 4251 Manual preview
System x3250 M3 Type 4251
Brand: IBM Pages: 32
IBM P 615 series Service Manual preview
P 615 series
Brand: IBM Pages: 491
Goonas LC180 User Manual preview
LC180
Brand: Goonas Pages: 13
Olive O3HD Quick Start Manual preview
O3HD
Brand: Olive Pages: 103
Cisco B200 M3 Quick Start Manual preview
B200 M3
Brand: Cisco Pages: 2
IBM BladeCenter HS22 Supplementary Manual preview
BladeCenter HS22
Brand: IBM Pages: 1
IBM 88728RU Specifications preview
88728RU
Brand: IBM Pages: 4
IBM eServer 250 xSeries Installation Manual preview
eServer 250 xSeries
Brand: IBM Pages: 84
IBM 8682 - Eserver xSeries 350 Hardware Maintenance Manual preview
8682 - Eserver xSeries 350
Brand: IBM Pages: 174
IBM 325 8639 Hardware Maintenance Manual preview
325 8639
Brand: IBM Pages: 145
IBM B50 User Manual preview
B50
Brand: IBM Pages: 221
Compaq AlphaServer GS60E Quick Specification preview
AlphaServer GS60E
Brand: Compaq Pages: 16
Compaq AlphaServer DS20E Technical Manual preview
AlphaServer DS20E
Brand: Compaq Pages: 16
Compaq ProLiant 4500 Servers Maintenance And Service Manual preview
ProLiant 4500 Servers
Brand: Compaq Pages: 89
Compaq AlphaServer GS60E Service Manual preview
AlphaServer GS60E
Brand: Compaq Pages: 180
Arcserve 9000 APPLIANCE SERIES Hardware Installation Manual preview
9000 APPLIANCE SERIES
Brand: Arcserve Pages: 14

Brands by name

Popular brands

Load more brands