Lenovo ThinkSystem SR650, Maintenance Manual

Page: 162 / 244

Figure 116. Removing a PCIe adapter from the system board
Step 1. Locate the PCIe slot 4. Then, pivot the PCIe adapter retention latch to the open position.
Step 2. Grasp the PCIe adapter by its edges and carefully pull it out of the PCIe slot.
Note: The PCIe adapter might fit tightly into the PCIe slot. If necessary, alternatively move each
side of the PCIe adapter a small and equal amount until it is removed from the slot.
If you are instructed to return the old PCIe adapter, follow all packaging instructions and use any packaging
materials that are provided.
Install a PCIe adapter
Use this information to install a PCIe adapter on the riser assembly or on the system board.
This topic contains the following information:
• “Install a PCIe adapter on the riser assembly” on page 154
• “Install a PCIe adapter on the system board” on page 156
Install a PCIe adapter on the riser assembly
Use the following information to install a PCIe adapter on the riser assembly.
Notes:
• Depending on the specific type, your PCIe adapter might look different from the illustration in this topic.
• Use any documentation that comes with the PCIe adapter and follow those instructions in addition to the
instructions in this topic.
Before installing a PCIe adapter on the riser assembly:
154
ThinkSystem SR650 Maintenance Manual