Lenovo ThinkSystem SR635 Maintenance Manual Download Page 141

Page: 141 / 246

Step 2. Remove the GPU adapter from the riser bracket. See “Remove a PCIe adapter” on page 122.

If you are instructed to return the old GPU adapter, follow all packaging instructions and use any packaging
materials that are provided.

Install a GPU adapter

Use this information to install a GPU adapter.

Static Sensitive Device

Ground package before opening”

on page 82

Notes:

• Only certain types of GPU adapters are supported, refer to “Specifications” on page 3 for detailed

information.

• GPU adapters are supported on some server models with requirements, refer to “Technical rules for GPU

adapters” on page 85.

To install a GPU adapter, complete the following steps:

Watch the procedure

. A video of the installation and removal process is available:

• YouTube:

https://www.youtube.com/playlist?list=PLYV5R7hVcs-DTDY1lmpIPpJVOzo7dKq14

• Youku:

http://list.youku.com/albumlist/show/id_52222446.html

Step 1. Locate the appropriate PCIe slot for the GPU adapter.
Step 2. Align the GPU adapter with the PCIe slot on the riser card. Then, carefully press the GPU adapter

straight into the slot until it is securely seated. See “Install a PCIe adapter” on page 125.

Step 3. Reinstall the riser assembly. See “Install a riser card” on page 120.

After installing the GPU adapter, complete the parts replacement. See “Complete the parts replacement” on
page 203.

Backplane replacement

Use this information to remove and install the backplane.

Remove the backplane for four 3.5-inch hot-swap drives

Use this information to remove the backplane for four 3.5-inch hot-swap drives.

Static Sensitive Device

Ground package before opening”

on page 82

Before removing the backplane:

1. Remove the top cover. See “Remove the top cover” on page 89.
2. Remove all the installed drives and drive fillers from the drive bays. See “Remove a hot-swap drive” on

page 111 and “Install a hot-swap drive” on page 112.

Chapter 3

Hardware replacement procedures

131

Summary of Contents for ThinkSystem SR635























































































































































































































































Search results

Summary of Contents for ThinkSystem SR635

Reviews:

Related manuals for ThinkSystem SR635

Brands by name

Popular brands

Lenovo ThinkSystem SR635, Maintenance Manual

Search results

Summary of Contents for ThinkSystem SR635

Reviews:

Related manuals for ThinkSystem SR635

Brands by name

Popular brands