Lenovo ThinkSystem HR350A User Manual And Hardware Maintenance Manual Download Page 34

Page: 34 / 171

2.2.13 System fan replacement

Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".

Caution: Hazardous moving parts. Keep fingers and other body parts away.

To remove a system fan, do the following:

Remove the top cover. See "2.2.3 Top cover replacement".

Lift the system fan module out of the chassis.

Removing the system fan

To reinstall, reverse the steps above.

2.2.14 System fan cage replacement

Do not proceed before reading and understanding the "Safety Precautions" section of this chapter and "Read Me First".

To remove a system fan cage, do the following:

Remove the top cover. See "2.2.3 Top cover replacement".

Remove all system fans. See "2.2.13 System fan replacement".

Rotate the latches on the system fan cage (Step 1).

Lift up the fan cage (Step 2).

To reinstall, reverse the steps above.

Summary of Contents for ThinkSystem HR350A












































































































































































Search results

Summary of Contents for ThinkSystem HR350A

Reviews:

Related manuals for ThinkSystem HR350A

Brands by name

Popular brands

Lenovo ThinkSystem HR350A, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkSystem HR350A

Reviews:

Related manuals for ThinkSystem HR350A

Brands by name

Popular brands