Lenovo ThinkStation P500, Hardware Maintenance Manual, Page: 71 / 232

Chapter 6. Advanced configuration
This chapter provides the following information to help you configure the computer:
• “Using the Setup Utility program” on page 65
• “Updating or recovering the BIOS” on page 69
Using the Setup Utility program
The Setup Utility program is used to view and change the configuration settings of your computer, regardless
of which operating system you are using. However, the operating system settings might override any similar
settings in the Setup Utility program.
Starting the Setup Utility program
To start the Setup Utility program, do the following:
1. Turn on or restart your computer.
2. Before Windows starts up, repeatedly press and release the F1 key until the Setup Utility program opens.
Note: If a power-on password or an administrator password has been set, the Setup Utility program
menu will not be displayed until you enter the correct password. For more information, see “Using
BIOS passwords” on page 66.
When the POST detects that the hard disk drive has been removed from your computer or the memory size
has decreased, an error message will be displayed. You must do one of the following:
• Press F1 to enter the Setup Utility program.
Note: After you enter the Setup Utility program, press F10 to save changes and exit the Setup Utility
program. Press Enter when prompted to confirm the exit. The error message will not be displayed again.
• Press F2 to bypass the error message and log in to the operating system.
Note: You have to enable the configuration change detection feature for the POST to detect the removal of
the hard disk drive. To enable the configuration change detection feature, do the following:
1. Start the Setup Utility program.
2. From the Setup Utility program main menu, select Security ➙ Configuration Change Detection ,
and press Enter.
3. Select Enabled and press Enter.
4. Press F10 to save changes and exit the Setup Utility program. Press Enter when prompted to confirm
the exit.
Viewing and changing settings
The Setup Utility program menu lists various items about the system configuration. To view or change
settings, start the Setup Utility program. See “Starting the Setup Utility program” on page 65. Then, follow
the instructions on the screen.
You can use either the keyboard or the mouse to navigate through menu choices. The keys used to perform
various tasks are displayed at the bottom of each screen.
© Copyright Lenovo 2014, 2015 65