Lenovo ThinkStation P500, Hardware Maintenance Manual, Page: 182 / 232

• If you are installing a memory module, open the retaining clips of the memory slot into which you
want to install the memory module.
Figure 115. Opening the retaining clips
8. Position the new memory module over the memory slot. Ensure that the notch 1 on the memory
module aligns correctly with the slot key 2 on the system board. Push the memory module straight
down into the slot until the retaining clips close.
Figure 116. Installing a memory module
9. Reinstall the optical drive bracket if you have removed it. See “Removing and reinstalling the optical
drive bracket” on page 124.
10. Reinstall the direct cooling air baffle. See “Removing and reinstalling the direct cooling air baffle” on
page 112.
What to do next:
• To work with another piece of hardware, go to the appropriate section.
• To complete the installation or replacement, go to “Completing the parts replacement” on page 198.
Installing or replacing a flex adapter
Attention: Do not open your computer or attempt any repair before reading and understanding the Chapter
1 “Read this first: Important safety information” on page 1.
Depending on your computer model, the type of flex adapter on your computer varies.
176
ThinkStation P500 and P700 Hardware Maintenance Manual