Lenovo ThinkStation 4262, Maintenance Manual, Page: 61 / 242

Diagnostic Error Code FRU/Action
018-250-XXX PCI Card Services error 1. PCI card
2. Riser card, if installed.
3. System board
020-000-XXX PCI Interface Test Passed No action
020-0XX-XXX PCI Interface error 1. PCI card
2. Riser card, if installed.
3. System board
020-195-XXX PCI Test aborted by user Information only Restart the test, if necessary
020-196-XXX PCI test halt, error threshold exceeded 1. Press F3 to review the log file.
2. Restart the test to reset the log file.
020-197-XXX PCI test warning 1. Make sure the component that is called out is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37.
2. Re-run test.
3. Replace the component that is called out in warning
statement.
4. Replace the component under test.
020-198-XXX PCI test aborted 1. If a component is called out, make sure it is
connected and/or enabled. See Chapter 6 “Using
the Setup Utility program” on page 37.
2. Flash the system and re-test. See “Updating
(flashing) the BIOS” on page 225.
3. Go to “Undetermined problems” on page 67.
020-199-XXX PCI test failed, cause unknown 1. Go to “Undetermined problems” on page 67.
2. Flash the system and re-test. See “Updating
(flashing) the BIOS” on page 225.
3. Replace component under function test.
020-262-XXX PCI system error 1. PCI card
2. Riser card, if installed.
3. System board
025-000-XXX IDE interface Test Passed No action
025-00X-XXX 025-01X-XXX IDE interface failure 1. IDE signal cable
2. Check power supply voltages.
3. Reseat IDE signal cable.
4. IDE device
5. System board
025-027-XXX IDE interface Configuration/Setup error 1. IDE signal cable
2. Flash the system. See “Updating (flashing) the
BIOS” on page 225.
3. Reseat IDE signal cable.
4. IDE device
5. System board
Chapter 8
.
Symptom-to-FRU Index
55