Lenovo ThinkServer TS150, User Manual And Hardware Maintenance Manual

Page: 68 / 148

3. Pull the bracket handle to slide the drive out of the drive bay.
Figure 27. Removing the drive from the drive bay
4. Flex two sides of the drive bracket to remove the drive from the bracket.
5. If you are instructed to return the old drive, follow all packaging instructions and use any packaging
materials that are supplied to you for shipping.
Installing a storage drive into drive bay 1
Note: For a 2.5-inch hard disk drive or solid-state drive, install the drive into a 2.5-inch to 3.5-inch drive
adapter first. See “Installing a 2.5-inch drive into a 2.5-inch to 3.5-inch drive adapter” on page 46.
To install a storage drive into drive bay 1, do the following:
1. Prepare your server. See “Preparing your server and removing the server cover” on page 41.
2. Flex the drive bracket and align pins
1
,
2
,
3
, and
4
on the bracket with the corresponding holes in the
drive. Do not touch the circuit board
5
on the bottom of the drive.
1
2
3
4
5
Figure 28. Installing the drive into the drive bracket
54
ThinkServer TS150 User Guide and Hardware Maintenance Manual