Lenovo ThinkServer TS150 Operating System Installation Manual Download Page 56

Page: 56 / 60

#unzip DD_Intel_NIC_1.3.29_Linux.zip
#cd DD_Intel_NIC_1.3.29_Linux
#tar xvf e1000e-3.2.4.2.tar.gz
#cd e1000e-3.2.4.2/src
#make install
#modprobe e1000e

Notes:

• If the file extension is not .tar.gz, skip the third command.

• In the command lines,

cd e1000e-3.2.4.2

represents the driver name. Use the corresponding file

name on your server.

5. Restart your server.

6. Configure network settings.

a. Click

Applications

in the upper-left corner. Then, click

System Tools

➙

Settings

➙

Network

b. In the Network window, select the Ethernet card you want to configure.

c. Click

Add profile

➙

IPv4

d. In the Addresses area, select a network address configuration method.

ThinkServer TS150 Operating System Installation Guide

Summary of Contents for ThinkServer TS150





























































Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands

Lenovo ThinkServer TS150, Operating System Installation Manual

Search results

Summary of Contents for ThinkServer TS150

Reviews:

Related manuals for ThinkServer TS150

Brands by name

Popular brands