Lenovo ThinkPad L450 Page 81 User Manual Download

Page: 81 / 186

Chapter 6. Advanced configuration

This chapter provides the following information to help you configure the computer:

•

“Installing a new operating system” on page 65

•

“Installing device drivers” on page 67

•

“Using the ThinkPad Setup program” on page 67

Installing a new operating system

In some situations, you might need to install a new operating system. This topic provides instructions on
how to install a new operating system.

Installing the Windows 7 operating system

Before you start, print these instructions.

Attention:

• The process of installing a new operating system deletes all the data on your storage drive, including the

data that were stored in a hidden folder.

• If your computer is equipped with both a hard disk drive and an M.2 solid-state drive, do not use the

M.2 solid-state drive as a bootable device. The M.2 solid-state drive is used for “cache” function and to
support the Intel Rapid Start Technology.

To install the Windows 7 operating system, do the following:

1. Copy all the subdirectories and files in the

C:\SWTOOLS

directory to a removable storage device.

• The supplement files for the Windows 7 operating system are in the

C:\SWTOOLS\OSFIXES

directory.

• The device drivers are in the

C:\SWTOOLS\DRIVERS

directory.

• The preinstalled programs are in the

C:\SWTOOLS\APPS

directory.

2. Start the ThinkPad Setup program. See “Using the ThinkPad Setup program” on page 67.

3. Select

Startup

➙

UEFI/Legacy Boot

. Then do one of the following:

• To install the Windows 7 (32-bit) operating system, select

Legacy Only

Both

• To install the Windows 7 (64-bit) operating system in Legacy mode, select

Legacy Only

• To install the Windows 7 (64-bit) operating system in UEFI mode, select

UEFI Only

4. Press the F10 key to exit the ThinkPad Setup program.

5. Insert the Windows 7 operating system installation DVD into the optical drive, and restart the computer.

6. Restore the

C:\SWTOOLS

directory that you backed up before installing the Windows 7 operating system.

7. Install the device drivers. See “Installing device drivers” on page 67.

8. Install the Windows 7 fix modules. You can find the Windows 7 fix modules in the

C:\SWTOOLS\OSFIXES\

directory. For more information, go to the Microsoft Knowledge Base home page at:
http://support.microsoft.com/

9. Install the registry patches, for example the Enabling Wake on LAN from Standby for ENERGY STAR

patch. To download and install the registry patches, go to the Lenovo Support Web site at:
http://www.lenovo.com/support

Summary of Contents for ThinkPad L450



























































































































































































Search results

Summary of Contents for ThinkPad L450

Reviews:

Related manuals for ThinkPad L450

Brands by name

Popular brands

Lenovo ThinkPad L450, User Manual

Search results

Summary of Contents for ThinkPad L450

Reviews:

Related manuals for ThinkPad L450

Brands by name

Popular brands