Lenovo ThinkCentre M725s User Manual And Hardware Maintenance Manual Download Page 64

Page: 64 / 72

14. Route and connect all the cables to the new system board.

15. Pivot the drive bay assembly downward and reinstall the removed parts. To complete the replacement,

see “Completing the parts replacement” on page 60.

Completing the parts replacement

After completing the installation or replacement for all parts, reinstall the computer cover and reconnect the
cables.

1. Ensure that all components have been reassembled correctly and that no tools or loose screws are left

inside your computer.

2. Ensure that the cables are routed correctly before reinstalling the computer cover. Keep cables clear of

the hinges and sides of the computer chassis to avoid interference when reinstalling the computer
cover.

3. Reinstall the computer cover.

M725s User Guide and Hardware Maintenance Manual

Summary of Contents for ThinkCentre M725s









































































Search results

Summary of Contents for ThinkCentre M725s

Reviews:

Related manuals for ThinkCentre M725s

Brands by name

Popular brands

Lenovo ThinkCentre M725s, User Manual And Hardware Maintenance Manual

Search results

Summary of Contents for ThinkCentre M725s

Reviews:

Related manuals for ThinkCentre M725s

Brands by name

Popular brands