4. Install the new card into the appropriate card slot on the system board. See “Locating parts on the
system board” on page 70. If you are replacing a PCI card, remove the old card currently installed
before installing the new one.
Figure 11. Removing the old card
Notes:
a. The card fits tightly into the card slot. If necessary, alternately move each side of the card a small
amount until it is fully removed from the card slot.
b. If the card is held in place by a retaining latch, press the card retaining latch
1
downwards to
disengage the latch. Grasp the card and gently pull it out of the slot.
5. Pivot the card latch to the closed position to secure the cards.
Chapter 8
.
Replacing FRUs
75
Summary of Contents for ThinkCentre A63
