manualshive.com logo in svg

Lenovo ThinkAgile VX 4-Socket 4U Certified Node, User Manual

The Lenovo ThinkAgile VX 4-Socket 4U Certified Node is a powerful and reliable solution for data-intensive workloads. Unlock the full potential of this product with our comprehensive User Manual, available for free download from our website. Get all the necessary details and instructions to maximize your experience with this incredible device.

Share
Download
background image

Step 2.  Separate the system board from the supporting sheet metal.

After disassembling the system board, comply with local regulations when recycling.

Disassemble the system board filler for recycle

Follow the instructions in this section to disassemble the system board filler before recycling.

Before disassembling the system board filler:

1.  Remove the system board filler from the server (see “Remove a system board filler” on page 113).
2.  Refer to local environmental, waste or disposal regulations to ensure compliance.

Complete the following steps to disassemble the system board filler:

Step 1.  Use a screwdriver and remove the six screws (three each side) on the system board filler. 

Figure 152. Disassembling the system board filler

Step 2.  Separate the latches from the system board filler.

After disassembling the system board filler, comply with local regulations when recycling.

Disassemble the front cover for recycle

Follow the instructions in this section to disassemble the front cover before recycling.

Before disassembling the front cover:

1.  Remove the front cover from the server (see “Remove the front cover” on page 131).
2.  Refer to local environmental, waste or disposal regulations to ensure compliance.

Complete the following steps to disassemble the front cover:

Step 1.  Use a flat tool (such as a screwdriver or blade) to scrape away the protruding part of the following 

stakes as illustrated: 

•  Three hollow stakes

268

User Guide for ThinkAgile VX7820 Appliance, ThinkAgile VX 4-Socket 4U Certified Node 

Summary of Contents for ThinkAgile VX 4-Socket 4U Certified Node









































































































































































































































































































Reviews:

No comments

Related manuals for ThinkAgile VX 4-Socket 4U Certified Node

IBM i Series Handbook preview
i Series
Brand: IBM Pages: 908
d3 Technologies d3 4x4pro Quick Start Manual preview
d3 4x4pro
Brand: d3 Technologies Pages: 10
BlueNet Video BB01D User Manual preview
BB01D
Brand: BlueNet Video Pages: 38
MAXDATA PLATINIUM 9000-4R User Manual preview
PLATINIUM 9000-4R
Brand: MAXDATA Pages: 18
QNAP TS-332X User Manual preview
TS-332X
Brand: QNAP Pages: 55
JIEYUN TECHNOLOGY J60 User Manual preview
J60
Brand: JIEYUN TECHNOLOGY Pages: 25
Advantech EKI-1511X User Manual preview
EKI-1511X
Brand: Advantech Pages: 76
Advantech ASMB-781 User Manual preview
ASMB-781
Brand: Advantech Pages: 92
Obvius AcquiLite A7810 Installation And Operation Manual preview
AcquiLite A7810
Brand: Obvius Pages: 29
IBM 4033 User Manual preview
4033
Brand: IBM Pages: 5
Comtrol DeviceMaster PRO Installation And Configuration Manual preview
DeviceMaster PRO
Brand: Comtrol Pages: 174
Inspur NF3180A6 User Manual preview
NF3180A6
Brand: Inspur Pages: 86
Supero Supero SUPERSERVER 5015A-H User Manual preview
Supero SUPERSERVER 5015A-H
Brand: Supero Pages: 84
Supero SC216A-R1200LPB User Manual preview
SC216A-R1200LPB
Brand: Supero Pages: 97
iServer MicroServer iTHX-W Firmware Upgrade Instructions preview
MicroServer iTHX-W
Brand: iServer Pages: 5
Raidon ST7610 User Manual preview
ST7610
Brand: Raidon Pages: 20
Dell EMC VxRail P470 Owner'S Manual preview
VxRail P470
Brand: Dell EMC Pages: 140
Digitus professional DN-16100-1 User Manual preview
DN-16100-1
Brand: Digitus professional Pages: 16

Brands by name

Popular brands

Load more brands