Lenovo System x3750 M4, Installation And Service Manual

Page: 146 / 982

• ServeRAID firmware is stored in ROM on the system board and the RAID adapter (if one is installed).
Configuring the server
Use this information to configure the server.
The following configuration programs come with the server:
• Setup utility
The Setup utility is part of the UEFI firmware. Use it to perform configuration tasks such as changing
interrupt request (IRQ) settings, changing the startup-device sequence, setting the date and time, and
setting passwords. For information about using this program, see “Using the Setup utility” on page 134.
• Boot Manager
The Boot Manager is part of the UEFI firmware. Use it to override the startup sequence that is set in the
Setup utility and temporarily assign a device to be first in the startup sequence. For more information
about using this program, see “Using the Boot Manager” on page 143.
• IBM ServerGuide Setup and Installation CD
The ServerGuide program provides software-setup tools and installation tools that are designed for the
server. Use this CD during the installation of the server to configure basic hardware features, such as an
integrated SAS/SATA controller with RAID capabilities, and to simplify the installation of your operating
system. For information about using this CD, see “Using the ServerGuide Setup and Installation CD” on
page 133.
• Integrated management module II
Use the IMM2 for configuration to update the firmware and sensor data record/field replaceable unit
(SDR/FRU) data, and to remotely manage a network. For information about using the IMM2, see “Using
the integrated management module II” on page 144 and the
Integrated Management Module II User's
Guide at http://www-947.ibm.com/support/entry/portal/docdisplay?lndocid=MIGR-5086346.
• VMware ESXi embedded hypervisor
An optional USB flash device with VMware ESXi embedded hypervisor software is available for purchase.
Hypervisor is virtualization software that enables multiple operating systems to run on a host system at
the same time. The USB embedded hypervisor flash device can be installed in USB connectors 3 and
4 on the system board. For more information about using the embedded hypervisor, see “Using the
embedded hypervisor” on page 150.
• Remote presence and blue-screen capture features
The remote presence and blue-screen capture features are integrated functions of the IMM2. The remote
presence feature provides the following functions:
– Remotely viewing video with graphics resolutions up to 1600 x 1200 at 75 Hz, regardless of the system
state
– Remotely accessing the server, using the keyboard and mouse from a remote client
– Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO
and diskette image files as virtual drives that are available for use by the server
– Uploading a diskette image to the IMM2 memory and mapping it to the server as a virtual drive
The blue-screen capture feature captures the video display contents before the IMM2 restarts the server
when the IMM2 detects an operating-system hang condition. A system administrator can use the
blue-screen capture feature to assist in determining the cause of the hang condition.
• Features on Demand Ethernet software
132
Lenovo System x3750 M4 Installation and Service Guide