Lenovo S5000-F Maintenance Manual Download Page 8

Page: 8 / 60

Lenovo S5000 Hardware Maintenance Manual

• Always look carefully for possible hazards in your work area. Examples of

these hazards are moist floors, nongrounded power extension cables, power
surges, and missing safety grounds.

• Do not touch live electrical circuits with the reflective surface of a plastic

dental mirror. The surface is conductive; such touching can cause personal
injury and machine damage.

• Do not service the following parts with the power on when they are removed

from their normal operating places in a machine:

—

Power supply units

—

Pumps

—

Blowers and fans

—

Motor generators

and similar units. (This practice ensures correct grounding of the units.)

• If an electrical accident occurs:

—

Caution: do not become a victim yourself.

—

Switch off the power.

—

Send the victim to get medical aid.

Summary of Contents for S5000-F





























































Search results

Summary of Contents for S5000-F

Reviews:

Related manuals for S5000-F

Brands by name

Popular brands

Lenovo S5000-F, Maintenance Manual

Search results

Summary of Contents for S5000-F

Reviews:

Related manuals for S5000-F

Brands by name

Popular brands