Lenovo RackSwitch G8332, Command Reference Manual

Page: 385 / 776

© Copyright Lenovo 2016 Chapter 4: Configuration Commands
385
NETCONF Configuration
This menu allows you to configure support for Network Configuration Protocol
(NETCONF), which provides mechanisms to install, manipulate and delete the
configuration of network devices. NETCONF is described in RFC 4741.
NETCONF over SSH Configuration
This menu allows you to enable NETCONF access over Secure Shell (SSH).
NETCONF over SSH is described in RFC 4742.
Table 167.
NETCONF Configuration Options
Command Syntax and Usage
[no] access netconf enable
Enables or disables NETCONF access to the switch.
Command mode: Global configuration
access netconf timeout
<30 ‐ 3600>
Configures the timeout value for NETCONF sessions, in seconds.
The default value is
300
seconds.
Command mode: Global configuration
default access netconf timeout
Resets the timeout value for NETCONF sessions to the default of
300
seconds.
Command mode: Global configuration
show access
Displays the current configuration.
Command mode: All
Table 168.
NETCONF over SSH Configuration Options
Command Syntax and Usage
[no] access netconf ssh enable
Enables or disables NETCONF access over SSH.
Command mode: Global configuration
access netconf ssh port
<TCP port number (1 ‐ 65535)>
Configures the TCP port used for NETCONF.
The default port number is
830
.
Command mode: Global configuration
default netconf ssh port
Resets the SSH port used for NETCONF to the default port number ‐
830
.
Command mode: Global configuration