Lenovo RackSwitch G8332, Command Reference Manual

Page: 181 / 776

© Copyright Lenovo 2016 Chapter 2: Information Commands
181
Networking Virtualization Information
The following table displays Networking Virtualization (NWV) information
commands.
Table 76.
Networking Virtualization Information Commands
Command Syntax and Usage
show nwv nsx ­ gw
Displays VXLAN Gateway information. For a sample output, see page 182 .
Command mode: All
show nwv nsx ­ gw datapath [
<VxLAN VNID (1 ‐ 16777216)>
]
Displays the VXLAN Gateway datapath configuration for all Virtual
Extensible LAN (VXLAN) Virtual Networks or just for a specific Virtual
Network. To view a sample output, see page 184 .
Command mode: All
show nwv nsx ­ gw mac ­ address [mcast ­ local|mcast ­ remote|
|ucast ­ local|ucast ­ remote]
Displays VXLAN Gateway Forwarding table information.

mcast ­ local
displays information for local multicast MAC addresses

mcast ­ remote
displays information for remote multicast MAC addresses

ucast ­ local
displays information for local unicast MAC addresses

ucast ­ remote
displays information for remote unicast MAC addresses
To view a sample output, see page 183 .
Command mode: All
show nwv nsx ­ gw tunnels
Displays VXLAN Gateway tunnels information. To view a sample output, see
page 185 .
Command mode: All
show nwv nsx ­ gw virtual ­ network [
<VxLAN VNID (1 ‐ 16777216)>
]
Displays VXLAN Gateway information for all Virtual Networks or for a
specific Virtual Network. To view a sample output, see page 185 .
Command mode: All
show nwv nsx ­ gw virtual ­ port [
<port alias or number>
]
Displays VXLAN Gateway information for all virtual ports or for a specific
virtual port. To view a sample output, see page 185 .
Command mode: All
show pki certificate
Displays the host SSL certificate needed by the NSX Manager. To view a
sample output, see page 186 .
Command mode: All