Lenovo RackSwitch G8264CS, Cli Command Reference

Page: 433 / 702

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
433
LLDP Port Configuration
Use the following commands to configure LLDP port options.
no lldp transmission ­ delay
Resets the transmission delay interval to its default value of
2
seconds.
Command mode: Global configuration
lldp trap ­ notification ­ interval
<1 ‐ 3600>
Configures the trap notification interval, in seconds.
The default value is
5
seconds.
Command mode : Global configuration
no lldp trap ­ notification ­ interval
Resets the trap notification interval to its default value of
5
seconds.
Command mode: Global configuration
show lldp [port [
<port alias or number>
]]
Display current LLDP configuration.
Command mode : All
Table 225.
LLDP Configuration Options (continued)
Command Syntax and Usage
Table 226.
LLDP Port Options
Command Syntax and Usage
lldp admin ­ status {tx_only|rx_only|tx_rx}
Configures the LLDP transmission type for the port, as follows:

Transmit only

Receive only

Transmit and receive
The default setting is
tx_rx
.
Command mode : Interface port
no lldp admin ­ status
Disables the LLDP transmission type.
Command mode : Interface port
[no] lldp trap ­ notification
Enables or disables SNMP trap notification for LLDP messages.
Command mode : Interface port
show interface port
<port alias or number>
lldp
Display current LLDP port configuration.
Command mode : All