Lenovo RackSwitch G8264, Installation Manual

Page: 32 / 106

32
G8264 Installation Guide
Before Installing the G8264
Recording Important Product Information
Attention: Product information is required in order to register your G8264, update
its firmware, place a service call, or replace the unit.
Some of the product information labels may be hidden from view once the G8264 is
installed. To prevent the need to remove the switch in order to read required
product information, locate and record the information shown on Table 9 prior to
installation.
An example of the product information labels is shown as follows:
Figure 7. Sample product labels from bottom, top, and rear of the switch
Note:
These examples are to help locate and identify the information labels. The
actual labels and information for your specific switch may differ.
The identification labels on the front, rear, and/or bottom of the G8264 contain the
Machine Type ‐ Model (MTM) number, serial number, part number of the switch.
These labels also include the Media Access Control (MAC) address (on the rear
panel of unit) of the switch. Though helpful, the MAC address is not required for
opening a service call.
Print this page and record product information below. Keep the information in a
safe place for future reference. You will need this information when you register the
switch or open a service call with Lenovo.
Table 9.
Important product information
Product Name RackSwitch G8264
Machine ‐ Type Model
Serial Number
Part Number
Media Access Control
(MAC) address for switch
MAC addresses for other
components
Machine Type-Model 1611-16E
S/N 1000001
P/N: 00E6965
FRU P/N: 00D6002
(1S) Lenovo MT-Model, S/N 161116E 1000001
S/N Y010CM1AG001
Made in Malaysia Date: 12-07-17 EC L37940
16116e100001
*00E6965*
*Y010CM1aG01*
MT: 7844-590 PID: 7844AGV
SN: 06AA123
MT: 7844 590
SN: 06AA123
EID:000435