Lenovo RackSwitch G8264, Command Reference Manual

Page: 529 / 794

© Copyright Lenovo 2017 Chapter 4: Configuration Commands
529
Autonomous System Filter Path Configuration
Note: The path number represents the AS path you wish to configure.
Table 276.
AS Filter Configuration Options
Command Syntax and Usage
as ­ path ­ list
<1 ‐ 8>
action {permit|deny}
Permits or denies Autonomous System filter action.
Command mode: Route map
as ­ path ­ list
<1 ‐ 8>
as ­ path
<1 ‐ 65535>
Sets the Autonomous System filter’s path number.
Command mode: Route map
[no] as ­ path ­ list
<1 ‐ 8>
enable
Enables or disables the Autonomous System filter.
Command mode: Route map
no as ­ path ­ list
<1 ‐ 8>
Deletes the Autonomous System filter.
Command mode: Route map
show route ­ map
<1 ‐ 255>
as ­ path ­ list
<1 ‐ 8>
Displays the current Autonomous System filter configuration.
Command mode: All