Lenovo px2-300d User Manual Download | Manualshive

Page: 170 / 172

background image

European Union - Compliance to the Electromagnetic Compatibility Directive

This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the
approximation of the laws of the Member States relating to electromagnetic compatibility. Lenovo cannot
accept responsibility for any failure to satisfy the protection requirements resulting from a non-
recommended modification of the product, including the installation of option cards from other
manufacturers.

This product has been tested and found to comply with the limits for Class B Information Technology
Equipment according to European Standard EN 55022. The limits for Class B equipment were derived for
typical residential environments to provide reasonable protection against interference with licensed
communication devices.

The Declaration of Conformity is available at http://support.lenovoemc.com/ce.

Important WEEE Information

The WEEE marking on Lenovo products applies to countries with WEEE and e-waste regulations (for
example, European Directive 2002/96/EC, India E-Waste Management & Handling Rules, 2011).
Appliances are labeled in accordance with local regulations concerning waste electrical and electronic
equipment (WEEE). These regulations determine the framework for the return and recycling of used
appliances as applicable within each geography. This label is applied to various products to indicate that
the product is not to be thrown away, but rather put in the established collection systems for reclaiming
these end-of-life products.

Country-specific information is available at http://www.lenovo.com/recycling.

European Union RoHS

Lenovo products sold in the European Union, on or after January 3, 2013, meet the requirements of the
European Union Directive 2011/65/EU; The Restriction of the Use of Certain Hazardous Substances in
Electrical and Electronic Equipment (RoHS).

For more information about Lenovo progress on RoHS, go to:
http://www.lenovo.com/social_responsibility/us/en/RoHS_Communication.pdf

India RoHS

RoHS compliant as per E-Waste (Management & Handling) Rules, 2011.

Lithium Battery – California Perchlorate Information

This product contains a CR coin cell lithium battery which contains perchlorate material—special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate.

Legal

160

Regulatory Information

«
...
168
169
170
171
172
»

Summary of Contents for px2-300d













































































































































































Reviews:

No comments

Related manuals for px2-300d

C50FSi - VB Network Camera

Brand: Canon Pages: 32

Brand: D-Link Pages: 2

Brand: Obihai Pages: 2

Brand: XAVI Technologies Corp. Pages: 71

Brand: Lancom Pages: 70

Brand: Patton electronics Pages: 12

Brand: SimpleTech Pages: 84

InnoMedia MTA 3328-2R

Brand: VoiceLine Pages: 18

Brand: Gigabyte Pages: 18

AirStation WZR-1166DHP

Brand: Buffalo Pages: 2

TeleCLIENT TC7730 Series

Brand: ETL Pages: 83

Brand: Network Critical Pages: 200

Brand: Arrow Storage Products Pages: 34

Brand: Maipu Pages: 26

Brand: US Robotics Pages: 180

Brand: ZyXEL Communications Pages: 30

PXI Terminal Block NI TB-2709

Brand: National Instruments Pages: 12

Brand: Hamlet Pages: 11

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands