Lenovo Motorola One Zoom
Level 2
– Service and Repair Manual
Lenovo Confidential Restricted:
PAGE 22
Do not share without consent from Lenovo
5.
Use the 3 mm Allen Wrench on the two center
screws to tighten the Display Removal Insert
into position.
6.
Slide both side rails on the Display Removal
Fixture firmly against the Display Insert. Use the
3 mm Allen Wrench to tighten the four outside
screws on the underside of the Display Removal
Fixture.
7.
Follow preheating steps described on Page 17.
8.
Slide the phone into the Battery Removal
Fixture as shown. Center the phone in the
Fixture.
9.
Use an alignment pin to lock the phone and the
Display Removal Insert as shown.
