Lenovo Moto G8 Plus
Level 2
– Service and Repair Manual
Lenovo Confidential Restricted:
PAGE 55
Do not share without consent from Lenovo
Battery Removal
/// WARNING ///
Failure to adhere to Safety Critical Note(s) may
increase risk of rupture, burning, or failure to
function safely when used by the customer.
Refer to the Battery Safety Guidelines.
NOTE
Remove the Battery only if it is
defective or damaged. After you
remove it, you cannot reuse it.
// CAUTION //
Handle the Battery Pack with care. If dropped on the
floor, it may be internally damaged and must be
scrapped.
Ensure Battery and its insulation are not damaged (e.g.
scratched, dented, punctured) prior to and through
assembly.
Prior to assembly, ensure Battery edges and surfaces
are not dented or deformed, and that fixtures and parts
that will contact the Battery are free of foreign material.
Ensure screws and screwdrivers do not contact the
Battery.
1.
Set the temperature of the Hot Plate to 80°C
(176°F).
// CAUTION //
Do not set the Hot Plate temperature higher than
80°C (176°F). Damage to the phone may occur.
NOTE
Preheating with an oven is also acceptable if the
oven is set to the same temperature.
2.
Place the phone on the Hot Plate, with the
Display side down.
3.
Wait 10 minutes for the adhesive to warm up.
