3. Plug the monitor power cord and the computer cord into grounded electrical outlets.
Note: A certified power supply cord has to be used with this equipment. The relevant
national installation and/or equipment regulations shall be considered. A certified
power supply cord not lighter than ordinary polyvinyl chloride flexible cord according
2
2
to IEC 60227 (designation H05VV-F 3G 0.75mm or H05VVH2-F2 3G 0.75mm ) shall be
used. Alternative a flexible cord be of synthetic rubber according to IEC 60245
2
(designation H05RR-F 3G 0.75mm ) shall be used.
4.
Connect one end of the HDMI cable to the HDMI connector on the back of the
computer, and the other end to the HDMI connector on the monitor.
1-4
Flat Panel Monitor User
’
s Guide