background image

Appendix B. Notices

 

Lenovo may not offer the products

 services

 or features discussed in this document in all 

countries. Consult your local Lenovo representative for information on the products and 
services currently available in your area. Any reference to a Lenovo product

program

or 

service is not intended to state or imply that only that Lenovo product

 program

or service 

may be used. Any functionally equivalent product

program

 or service that does not infringe 

any Lenovo intellectual property right may be used instead. 
However

it is the user 's responsibility to evaluate and verify the operation of any other 

product

 program

 or service. 

Lenovo may have patents or pending patent applications covering subject matter described in 
this document. The furnishing of this document does not give you any license to these patents. 
You can send license inquiries

 in writing

 to: 

Lenovo (United States), Inc. 
1009 Think Place - Building One 
Morrisville, NC 27560 
U.S.A.

 

Attention: Lenovo Director of Licensing

 

LENOVO PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY 
KIND

 EITHER EXPRESS OR IMPLIED

 INCLUDING

 BUT NOT LIMITED TO

THE 

IMPLIED WARRANTIES OF NON-INFRINGEMENT

 MERCHANTABILITY OR 

FITNESS FOR A PARTICULAR PURPOSE. Some jurisdictions do not allow disclaimer of 
express or implied warranties in certain transactions

therefore

 this statement may not apply 

to you. 

This information could include technical inaccuracies or typographical errors. Changes are 
periodically made to the information herein; these changes will be incorporated in new editions 
of the publication. Lenovo may make improvements and/or changes in the product(s) and/or 
the program(s) described in this publication at any time without notice. 

The products described in this document are not intended for use in implantation or other life 
support applications where malfunction may result in injury or death to persons. The 
information contained in this document does not affect or change Lenovo product 
specifications or warranties. Nothing in this document shall operate as an express or implied 
license or indemnity under the intellectual property rights of Lenovo or third parties. All 
information contained in this document was obtained in specific environments and is presented 
as an illustration. The result obtained in other operating environments may vary. 

Lenovo may use or distribute any of the information you supply in any way it 

believes appropriate without incurring any obligation to you. 

Any references in this publication to non-Lenovo Web sites are provided for 

convenience only and do not in any manner serve as an endorsement of those Web 

sites. The materials at those Web sites are not part of the materials for this Lenovo 

product, and use of those Web sites is at your own risk. 

Any performance data contained herein was determined in a controlled environment. 

Therefore, the result obtained in other operating environments may vary 

significantly. Some measurements may have been made on development-level 

systems and there is no guarantee that these measurements will be the same on 

generally available systems. Furthermore, some measurements may have been 

estimated through extrapolation. Actual results may vary. Users of this document 

should verify the applicable data for their specific environment. 

Appendix B.

 B-1 

Summary of Contents for LI2342






























Reviews: