Lenovo Legion 5 Hardware Maintenance Manual Download Page 59

Page: 59 / 82

Go to

https://support.lenovo.com/partslookup

to look up the Lenovo part number of the following replacement

part:

SSD stand off

Remove the battery pack

Make sure the following FRUs (or CRUs) have been removed.

“Remove the lower case” on page 50

“Remove the solid-state drive (SSD) plate” on page 51

Step 1. Remove four screws and then remove the battery pack.

Note:

Attach the battery gasket to the battery pack when replacing the battery pack.

Figure 46. Remove the battery pack

Screw specifications

Number of screws

M2 x L4.5

Go to

https://support.lenovo.com/partslookup

to look up the Lenovo part number of the following replacement

part:

Battery pack

Remove the Wi-Fi card

Make sure the following FRUs (or CRUs) have been removed.

“Remove the lower case” on page 50

“Remove the solid-state drive (SSD) plate” on page 51

Step 1. Detach the main and auxiliary antenna cable connectors. Remove one screw and then remove the

Wi-Fi card by pulling it away from the slot.

Chapter 4

Removing a FRU or CRU

Summary of Contents for Legion 5



















































































Search results

Summary of Contents for Legion 5

Reviews:

Related manuals for Legion 5

Brands by name

Popular brands

Lenovo Legion 5, Hardware Maintenance Manual

Search results

Summary of Contents for Legion 5

Reviews:

Related manuals for Legion 5

Brands by name

Popular brands