7
.
Chapter 1. 1-6
Connect the audio cable to
A/I
audio jack of the monitor and the other end on the
back of the computer
soundcard audio out jack
.
9.
Place all cables(
Power cord
/ VGA/HDMI/USB/Audio) into the cable clip indicated in
below figure.
8
.
Insert the power cord into the monitor ,then plug the monitor power cord and the
computer cord into grounded electrical outlets.
Note:
A certified power supply cord has to be used with this equipment. The
relevant national installation and/or equipment regulations shall be considered. A
certified power supply cord not lighter than ordinary polyvinyl chloride flexible
cord according to IEC 60227 (designation H05VV-F 3G 0.75mm2 or H05VVH2-F2
3G0.75mm2) shall be used. Alternative a flexible cord be of synthetic rubber according
to IEC 60245 (designation H05RR-F 3G 0.75mm2) shall be used.
