Lenovo IdeaPad S200 Hardware Maintenance Manual Download

Page: 59 / 138

Chapter 5. Security

This chapter contains the following topics:

•

“Locking the computer” on page 53

•

“Viewing and changing security settings in the Setup Utility program” on page 54

•

“Preventing unauthorized access to the computer” on page 54

•

“Using and understanding firewalls” on page 55

•

“Protecting data against viruses” on page 55

Locking the computer

This section provides information about locking the computer with the locking devices to keep the computer
safe.

Locking the computer cover

Locking the computer cover helps prevent unauthorized people from gaining access to the inside of your
computer. Your computer comes with a padlock loop so that the computer cover cannot be removed
when a padlock is installed.

Figure 7. Installing a padlock

Summary of Contents for IdeaPad S200











































































































































Search results

Summary of Contents for IdeaPad S200

Reviews:

Related manuals for IdeaPad S200

Brands by name

Popular brands

Lenovo IdeaPad S200, Hardware Maintenance Manual

Search results

Summary of Contents for IdeaPad S200

Reviews:

Related manuals for IdeaPad S200

Brands by name

Popular brands